Triggering - The Trigger Subsystem; Trigger; Trigger[N]:Delay - Keysight Technologies N778 C Series Programming Manual

Triggering - The TRIGger Subsystem

Command:

:TRIGger

Syntax: :TRIGger<wsp>NODEA|1|NODEB|2
Description: Generates a hardware trigger.
Parameters: 1 or NODEA:
2 or NODEB:
A hardware trigger cannot be effective in the DISabled triggering mode but can be effective in DEFault, PASSthrough or
LOOPback triggering modes, see
Response: None
Example: :trig 1
Command:

:TRIGger[n]:DELay?

Syntax: :TRIGger[n]:DELay?
Description: Returns factor for delay. Effective trigger delay time = factor/32 Mhz
Parameters: None
Response: Factor
Example: :trig1:del? → +0
Command: :TRIGger[n]:DELay
Syntax: :TRIGger[n]:DELay<wsp><value>
Description: Defines factor for delay. Effective trigger delay time = factor/32 Mhz. That means, trigger event is excuted after specified
time after input trigger.
Parameters: Integer number between 0-997 (including limits)
Response: None
Example: :trig1:del 10
Keysight N778xC Series Polarization Instruments Programming Guide
Is identical to a trigger at the Input Trigger Connector.
Generates trigger at the Output Trigger Connector.
:TRIGger:CONFiguration
Measurement Operations & Settings
on page 59 for information on triggering modes.
4
55