Start / Stop " Key Introduction; Program " Key Introduction; Function " Key Introduction - Renesas R8C Series User Manual

RSSHEUM0003 - 0101
Rev.1.00
In any mode expect " Stand By " mode, when " Power " key pressed, the platform with run
into " Stand By " mode.
The LCD backlight is turned off in " Stand By " mode.
In " Initial " mode, the LCD will display the first level menu, which allow user to select the
dedicated washer program.

2.1.2 " Start / Stop " key introduction

The " Start / Stop " key change the platform running status like below:
While in " Stop ", all loading is off and the LCD displays the fourth level menu.
While "Start / Stop" key pressed again, the program is resumed.

2.1.3 " Program " key introduction

When " Program " key pressed, the LCD display the first Level Menu and user can shift program
selection button by pressing " + " or " – " key. Below figure shows the rule.
Memo
Strong
Special Spin

2.1.4 " Function " key introduction

When " Function " key pressed, the LCD display the third Level Menu and user can shift the
function select button by pressing " + " or " – " key. Below figure shows the rule.
No function
Renesas System Solution (Beijing) Co., Ltd, Shanghai Branch
Unit 207 AZIA Center, No.1233 Lujiazui Ring Road, Pudong District, Shanghai, China
Tel: (86-21) 6888-0556
Run
Soft Speedy
Rinse
Save water
Save water & Tube dry
Fax: (86-21) 6888-0559
Stop
Standard
Wash Silk
Page 19
Zip: 200120
Children
Wool
Tube dry