Using The Platform; Platform Emulation And Debugging - Renesas R8C Series User Manual

RSSHEUM0003 - 0101
Rev.1.00

5.1 Platform emulation and debugging

In this part, the configuration of the platform emulation and debugging is introduced. Below figure
shows system emulation environment with Renesas Hew and E8 debugger. For detail introduction,
please refer to Renesas HEW and E8 debugger user manuals.
(Windows98SE/ME/2000/XP)
Below picture shows the platform debugging with host PC and Renesas E8 debugger. Please note
that, in debugging mode, do not mount "K1" (Relay) onto the board and also do not short Pin
3 and Pin 4 of "K1" on the board, because if Pin 3 and Pin 4 of "K1" shorted, system 5V is
floating on 220V AC, which will damage E8 debugger and host PC.
Renesas System Solution (Beijing) Co., Ltd, Shanghai Branch
Unit 207 AZIA Center, No.1233 Lujiazui Ring Road, Pudong District, Shanghai, China
Tel: (86-21) 6888-0556

5. Using the Platform

Install
PC
Fax: (86-21) 6888-0559
HEW
E8(97 x 65 x
21mm)
Tiny or SLP
Page 41
Zip: 200120