Softener Inlet; Platform Demo Program; Power Down Recovery - Renesas R8C Series User Manual

RSSHEUM0003 - 0101
Rev.1.00
Soft
Wool
Below table shows strengthened stream option in " Memo ", " Standard ", " Strong " and " Soft "
programs:
Strong
stream
Memo/Stand
ard/Strong
Soft
In these programs, the main stream and the strong stream executed alternately at high and middle
water level, which is combined with 2 minutes main stream and 20 seconds strong steam.

3.2.8 Softener inlet

In the last time rinse, at the beginning of the inlet process, there is a 10 seconds softener inlet
process at the same time with water inlet. Which is described in the inlet process.

3.2.9 Platform demo program

The platform will run demo program by when jumper 3 in " off " status. After " Power " key pressed,
the program will run automatic washer program without user setting. During this mode, the platform
will run automatic washer program repeatedly, which mean after finishing one time program running
the platform will resume another time program running with the same setting.

3.2.10 Power down recovery

The platform enabled the power down recovery function using R8C 2A/2B MCU Voltage Detection
function. For technical details, please refer to the schematic and s/w source code.
Renesas System Solution (Beijing) Co., Ltd, Shanghai Branch
Unit 207 AZIA Center, No.1233 Lujiazui Ring Road, Pudong District, Shanghai, China
Tel: (86-21) 6888-0556
50Hz 0.9/0.7
60Hz 0.8/0.8
50Hz 0.4/0.6
60Hz 0.3/0.6
High
50Hz 60Hz
1.4/0.6 1.2/0.6
1.3/0.6 1.1/0.6
Fax: (86-21) 6888-0559
0.7/0.7 0.5/0.6
0.6/0.7 0.4/0.6
0.3/0.6 0.2/0.6
0.2/0.6 0.1/0.6
Middle
50Hz 60Hz
1.2/0.5 1.0/0.6
1.1/0.5 0.9/0.6
Page 36
Zip: 200120
None
Low
None