FujiFilm FCR XG-1 Service Manual page 1092

2. Relocating the Machine
CAUTIONS
• When relocating the machine by use of its casters, raise the adjustable feet of the machine all
the way up to their upper limit.
• When moving the machine, support it so that it will not topple down.
• When the machine should be moved over some step or bump, move it as slowly as possible
to avoid shock to it.
• If a step or bump over which the machine should be moved is 10 mm or higher, place a rigid
steel plate or the like over such a step or bump.
(1) Raise the adjustable feet of the machine.
(2) Relocate the machine.
3. Installation After Relocation
3.1 Connecting the Cables
"7. Connecting the Cables"
3.2 Final Placement
"10. Final Placement"
3.3 Powering ON the CL/RU
"11. Powering ON the CL/RU"
3.4 Image/Conveyance Checks
"12 Image/Conveyance Checks"
3.5 Powering OFF the CL/RU
"13. Powering OFF the CL/RU"
3.6 Cleaning the CL/RU
"14. Cleaning the CL/RU"
010-051-05
02.20.2002 FM3328
CR-IR346RU Service Manual
Appx IN-1-3
Appx IN-1-3