FujiFilm FCR XG-1 Service Manual page 1057

(6) Remove the vinyl cover.
CAUTION
To remove the four nuts that secure the machine retaining base and carrier pallet,
loosen the four nuts evenly one by one, and then remove them.
(7) Lower the machine onto the carrier pallet.
As the four nuts are loosened, the machine retaining base is lowered, so that the
machine rests down on the carrier pallet.
010-051-06
04.20.2002 FM3386
Machine
[Remove] Vinyl cover
Carrier pallet
FR6H7652.EPS
Machine
#1
[Remove] PP band
#2
[Remove] Displacement prevention member
CR-IR346RU Service Manual
Carrier pallet
Nut
Machine retaining base
#4
[Remove]
Na10 (x4)
#3
[Remove] Machine retaining
corrugated board
IN - 10
Machine retaining
base
Carrier pallet
FR6H7602.EPS
IN - 10