FujiFilm FCR XG-1 Service Manual page 1037

(3) Reinstall the after-reading conveyor cover.
"11.5 Subscanning Unit (Cleaning the Light-Collecting Guide), I Removal
Procedures"
(4) Reinstall the light-collecting mirror.
"(3) of 11.4 Subscanning Unit (Cleaning the Flywheel/Light-Collecting Mirror/
Lower Rollers/Guides)"
(5) Reinstall the spring and gears.
N INSTRUCTION N
The gear (large) and gear (small) should be mounted in place as illustrated below.
Sensor (SZ5)
Slit (large)
(6) Reverse the procedures for removing the driven shaft grip roller (upper).
(7) Reverse the procedures for removing the cleaning brush.
010-051-01
010-051-00
08.30.2001 FM3058
10.10.2000 FM2887 (1)
Gear (small)
CR-IR346RU Service Manual
Gear (large)
FRONT
Slit (small)
Pinionless section
D-shaped cut
FR6H6073.EPS
PM - 50
PM - 50