FujiFilm FCR XG-1 Service Manual page 1079

10.2 Securing the Machine with the Retainers
N NOTE N
Before drilling holes for embedding the anchor nuts, wear protective goggles.
REFERENCE
When determining the locations for embedding the anchor nuts, temporarily install the
machine and retainers in place, and then mark the locations.
At that time, adjust the height of the adjustable foot so that the positional relationship
between the retainer and the adjustable foot nut and spacer is as shown below.
Retainer
(1) Determine the locations for embedding the anchor nuts.
Marking location
x4
F
R
O
N
T
010-051-00
10.10.2000 FM2887 (1)
Nut
Spacer
Adjustable foot
614 mm (reference value)
Machine
Retainer
CR-IR346RU Service Manual
FR6H7600.EPS
398 mm (reference value)
FR6H7613.EPS
IN - 30
IN - 30