FujiFilm FCR XG-1 Service Manual page 1073

7. Connecting the Cables
7.1 Connecting the Power Cable and Checking Resistance
Value
WARNING
Before measuring the resistance value, make sure that the power plug is unplugged
from the outlet.
(1) Connect the power cable.
(2) Place the breaker switch in the ON position.
(2)
ON
(3) Measure the resistance value.
Resistance value
<For use in Japan and the US>
(4) Place the breaker switch in the OFF position.
010-051-00 010-051-01
10.10.2000 FM2887 (1) 08.30.2001 FM3058
Terminal L – N
100 k Ω –
N
CR-IR346RU Service Manual
Breaker switch
(Reference value)
L – E
N – E
∞ ∞
<For use in Europe>
E
E
N
L
L
(1)
[Connect]
Power cable
CHECK
<For use in the UK, etc.>
E
N
L
FR6H7007.EPS
IN - 24
FR6H7638.EPS
IN - 24