FujiFilm FCR XG-1 Service Manual page 1074

7.2 Connecting the Interface Cable
CAUTION
A telephone cable should not be plugged into the I/F cable connector.
The type of cable compatible with this machine is an IEC950/UL1950-listed cable only.
N NOTES N
• Either the UTP type or STP type of the I/F cable may be connected to the CR-
IR346RU. However, even when the I/F cable is of shielded type (STP type), a ferrite
bead should be attached to it.
• Make sure that 50 to 80 mm of the cable protrudes from the ferrite bead (on the side
you will install into the RU).
010-051-01
010-051-00
08.30.2001 FM3058
10.10.2000 FM2887 (1)
CR-IR346RU Service Manual
IN - 25
IN - 25