FujiFilm FCR XG-1 Service Manual page 1022

10.4 Reinstalling the Side-Positioning Conveyor
(1) Reverse the procedures for removing the movable guide.
N NOTE N
Make sure that the upper grip roller (short) is fitted in the notch of the arm.
(2) Reverse the procedures for removing the cloth roller.
REFERENCE
The side-positioning conveyor should be reinstalled after the preventive maintenance
for the subscanning unit has been completed.
010-051-00 010-051-01
10.10.2000 FM2887 (1) 08.30.2001 FM3058
Upper grip roller (short)
CR-IR346RU Service Manual
PM - 35
Arm
FR6H6083.EPS
PM - 35