1.
Preparation Prior to Relocation
1.1
Securing the Light-Collecting Mirror
N NOTES N
• Take note of the product serial number of the machine to be relocated.
• Back up "CONFIGURATION" and "HISTORY.LOG" onto a floppy diskette.
CAUTION
If shocks or vibrations caused by any bump on the floor are possibly transmitted to the machine
during its transfer, be sure to secure the light-collecting mirror in place. Otherwise, the light-
collecting mirror might be broken by such vibrations.
(1) Start the M-Utility.
(2) [6][ENT] ¡ [4][ENT] ¡ [7][ENT] ¡ [2][ENT]
The light-collecting mirror is locked.
(3) Power OFF the RU and CL.
N NOTE N
Once "LOCK" is executed, the RU no longer works properly, so that power of the RU
should be turned OFF immediately.
1.2
Disconnecting the Cables
(1) Disconnect the power and interface cables.
010-051-05
02.20.2002 FM3328
CR-IR346RU Service Manual
Appx IN-1-2
FR6H7813.EPS
Appx IN-1-2