FujiFilm FCR XG-1 Service Manual page 1041

14. Reinstalling and Cleaning the Covers
CAUTION
Before reinstalling the covers, make sure that the high-voltage switch of the SCN12A
board is in the ON position.
(1) Reinstall the covers by reversing their removal procedures.
"5. Removing the Covers"
(2) Clean the covers.
15. Securing the Machine
15.1 Connecting the Cables.
(1) Connect the cables by reversing their disconnection procedures.
"4.2 Disconnecting the Cables"
15.2 Securing the Machine
(1) Secure the machine by reversing the procedures for unlocking the retainers.
"4.1 Unlocking the Retainers"
010-051-00
10.10.2000 FM2887 (1)
CR-IR346RU Service Manual
PM - 54
PM - 54