FujiFilm FCR XG-1 Service Manual page 1076

7.2.2 Network Connection
N NOTE N
For the I/F cable used for network connection, a straight cable should be used.
(1) Attach a ferrite bead to the I/F cable.
To do so, tie the cable and its loop together.
[Secure] Cable tie
[Attach] Ferrite bead
(2) Connect the I/F cable to the I/F cable connector of the RU.
REFERENCE
The I/F cable should be connected with its ferrite bead end on the RU side.
Ferrite bead
010-051-01
010-051-00
08.30.2001 FM3058
10.10.2000 FM2887 (1)
#2
#1
I/F cable
connector
I/F cable
Ferrite bead
I/F cable
CR-IR346RU Service Manual
I/F cable
50–80mm
FR6H7810.EPS
Switching hub
(100 BASE - T or
10 BASE - T)
Power cable
Network
FR6H7725.EPS
IN - 27
IN - 27