FujiFilm FCR XG-1 Service Manual page 1087

12.1 Conveyance Checks
N NOTE N
The trimming function should be disabled.
"CL Service Manual/Function-specific Reference/2. Setup Necessary When
Editing the Film Annotation Character Format"
(1) Output the image exposed at 1 mR.
At this time, make sure that the IP conveyance mechanism of the RU is operating
normally.
"RU Instruction Manual/2. Operating Procedures"
N CHECKS N
• There should be no offensive noise or odor.
• There should be no IP jam.
• The IP should be free from any scratch or damage after reading.
If anything abnormal is found, see [Troubleshooting Volume].
12.2 Image Checks
(1) Verify that there is no unusual nonuniformity found on the output film and on the image
displayed on the image monitor.
N CHECK N
There should be no unusual nonuniformity.
If anything abnormal is found, see [Troubleshooting Volume].
010-051-01
010-051-00
08.30.2001 FM3058
10.10.2000 FM2887 (1)
CR-IR346RU Service Manual
IN - 38
IN - 38