FujiFilm FCR XG-1 Service Manual page 1001

3.3 Checking the Output Characters
Make sure that the film character format information that was set in "Outputting the Film for
Image Check" is displayed on the output film. Also verify that none of the characters look
blurred or broken.
(1) Check the output characters.
N CHECKS N
• Make sure that the character format information that was set is correct.
• Check for anything abnormal, such as blurred or broken characters.
If anything abnormal is found, see [Troubleshooting Volume].
REFERENCE
The details of output characters and the character display locations are as follows.
FUJI HOSPITAL
G 1.0G#0.7+0.50R5Q0.5
SKULL GENERAL
L 4.0 S200C✼1.2✼1.0AP
010-051-00
010-051-00
10.10.2000 FM2887 (2)
10.10.2000 FM2887 (1)
(1) Hospital name (medical institution name)
(13) Image processing conditions
(14) Exposure menu
(15) Standardization conditions
and correction item
(16) Image reversal mark
CR-IR346RU Service Manual
(4) Patient ID
(5) Patient name
R - > L
0000000001 John Smith [M]
1992. 11. 27 [17:43] 0%
SCALE: 5
(17) Exposure time
(6) Date of exposure
(12) IP barcode No.
(2) EDR mode and menu code
(3) System ID and image No.
(10) Film mark
(7) Sex
(8) Age or date of birth
G 1.0G#0.7+0.50R5Q1.0
23
RT-04
(9) Set processing information
(11) Reduction ratio
PM - 14
04001676 A0000 A020
FR6H6084.EPS
PM - 14