5: Wave (Only Available When Syemb06 Installed); Waveform Number Select - Yamaha TG500 Owner's Manual

[UTILITY/SELECT] -> 5: Wave -> [ENTER]
This function only appears if one or two SYEMB06 Memory Expansion Boards are
installed in the TG500 expansion memory slot (see page 282 for details on memory
expansion).
Specifies the number of the waveform to be edited using the WAVE EDIT func-
tions (accessed by pressing the [EDIT/COMPARE] key from this screen), and the
number of the waveform to which a sample loaded from card will be assigned.
Waveform
Range: 00 ... 63
upper display line.
UTILITY MODE / WAVE EDIT MODE / 5: Wave
5: WAVE
UTL WAVE
Waveform = 00(InitWave)
The name of the selected waveform appears between parentheses on the
WAVE 237