DRUM VOICE EDIT MODE / 4: Effect
4-09: PARAMETER 1 / 4-10: PARAMETER 2
[PLAY/MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 4: Effect -> [ENTER] -> [PAGE]
-> 4-09: Parameter 1 ->[ENTER]
-> 4-10: Parameter 2 ->[ENTER]
rameters in these three screens to fine-tune the effect.
parameter screens. The name of the selected parameter is shown in the upper right
corner of the display, while the parameter unit ("s" for seconds, "%" for percent,
"dB" for decibels, etc.) is shown in parentheses in the lower right corner.
this parameter is turned "off," the "WET:DRY" parameters (page 184) have no effect.
186
4-09: PARAMETER 1 / 4-10: PARAMETER 2
Each of the TG500's 90 effects has 8 parameters that can be edited via the pa-
DRM EF1 Param <Rev.Time>
2
1.
0.8 8 ( s ) é
Parameters
DRM EF1 Param <Init Dly>
0
è
50 4 ( ms) é
Parameters
DRM EF1 Param <ER/Rev >
8
è 6
5.6 ( % )
Parameters
,
.
Use the [
] and [
] keys to select the parameters and switch between the three
The parameters are different for each effect (refer to page 271 for details).When