Filter Data Copy - Yamaha TG500 Owner's Manual

VOICE EDIT MODE / 3: Full Edit. 3-3: Filter
[PLAY MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 3: Full Edit -> [ENTER] -> 3-3: Filter -> [ENTER]
other voice (the "source" voice) to be copied to the current voice. You can copy a
filter setup that is close to the type you want, then edit it to produce the required
sound.
the [-1/NO] and [+1/YES] keys to select the voice from which the filter data is to be
copied.
appear on the display.
copy operation. Once the copy operation has finished, "Completed!" will appear on
the display briefly, then the display will return to the filter edit mode.
130

FILTER DATA COPY

FILTER DATA COPY
This function facilitates voice editing by allowing the filter parameters from any
Press the [STORE/COPY] key while in the filter edit mode.
VCE FLT Copy from?
6
¡ 2:SC Klav
Use the [MEMORY] key to select the internal, preset, or card memory; then use
Once the source voice has been selected, press the [ENTER] key. "Sure?" will
VCE FLT Copy Sure?
¡62:SC Klav
Press the [+1/YES] key to copy the filter data, or press [-1/NO] to cancel the