Yamaha TG500 Owner's Manual page 29

CARD VOICE MEMORY
CARD memory voice numbers begin with the letter "C". The CARD
memory is one or two optional Yamaha MCD64 Memory Card (or pre-pro-
grammed voice cards) plugged into the TG500 DATA 1 and/or DATA 2 slot.
Memory cards are convenient for external storage and transportation of voices
you or others create. You can also store sets of related voices on different
memory cards. An MCD64 Memory Card holds four banks of 64 voices each
— a total of 256 voices per card. Each card is also divided into two banks,
each holding two voice banks of 64 voices each. The card bank to be accessed
(1 or 2) must be selected via the UTILITY mode "4:Card" function "4-1:Bank"
parameter (page 233). Thus, 128 of the 256 voices stored on a card can be
accessed at a time.
DATA 1 CARD VOICE MEMORY
C
.............................
I
C
............................
II
DATA 2 CARD VOICE MEMORY
C
...........................
III
C
..........................
IV
A properly formatted Yamaha MCD64 memory card (or an
appropriate pre-programmed voice card) must be inserted in
the DATA 1 and/or DATA 2 slot before the card memory can be
IMPORTANT
selected.
Select a Voice & Play
1
Select the Voice Play Mode
Press the [PLAY MODE] key as many times as necessary to select the
voice play mode. "VCE PLAY" will appear on the top line of the LCD panel.
VCE PLAY
EF=EQ ¥ ER /Rev.Room1
The information displayed on the bottom display line tells you
about the current effect mode and what effects are assigned to
the TG500's two effect processors. See the "Effects" section
DETAIL
beginning on page 251 for more details.
É
00 :AP Grand
2. Selecting And Playing Voices
17