UTILITY MODE / WAVE EDIT MODE / 4: Card
[UTILITY/SELECT] -> 4: Card -> [ENTER] -> [PAGE] -> 4-4: Format -> [ENTER]
instrument or device, will have to be formatted specifically for use with the TG500.
Note that this operation will erase any existing data on the card.
a card plugged into the DATA 1 slot, or "2" to format the DATA 2 slot. After plug-
ging the card to be formatted into the appropriate card slot, press [ENTER] to begin
the card format procedure. The following confirmation display will appear:
tion, or press [-1/NO] to cancel.
play.
236
4-4: FORMAT
4-4: FORMAT
New memory cards, or cards that have been formatted for use with a different
UTL Card Format
Slot= 1(------)
Position the cursor at the "Slot=" parameter and select "1" if you want to format
UTL Card Format Sure?
Slot= 1(------)
Press [+1/YES] to confirm that you want to go ahead with the card format opera-
When the card has been formatted, "Completed!" will appear briefly on the dis-