4-2: Initialize - Yamaha TG500 Owner's Manual

VOICE EDIT MODE / 4: Recall/Init.
[PLAY MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 4: Recall/Init. -> [ENTER] -> 4-2: Initialize -> [ENTER]
an existing voice, use this function to initialize all voice parameters.
display will appear:
(which will erase all current edited data), or press [-1/NO] to cancel.
initialized.
164

4-2: INITIALIZE

4-2: INITIALIZE
When you want to program a totally new voice "from scratch," rather than editing
VCE Initialize
Press [ENTER] to begin the initialize procedure. The following confirmation
VCE Initialize Sure?
Press [+1/YES] to confirm that you want to go ahead with the initialize operation
"Completed!" will appear briefly on the display when the voice data has been
For initial voice parameter, see page 284.