1-3: Output - Yamaha TG500 Owner's Manual

UTILITY MODE / WAVE EDIT MODE / 1: System
[UTILITY/SELECT] -> 1: System -> [ENTER] -> [PAGE] -> 1-3: Output -> [ENTER]
Output
222

1-3: OUTPUT

1-3: OUTPUT
This parameter determines which of the TG500's outputs are active.
UTL SYSTEM
Output= norm
Range: norm, indiv
When set to "norm," the stereo outputs (OUTPUT L and R) and individual
outputs 1 and 2 are active. In this case individual outputs 3 and 4 can not be
used.
When "indiv" is selected individual outputs 3 and 4 can also be used. In
this case voices assigned to individual outputs 1, 2, 3 and 4 are not delivered
via the stereo output and phone jacks. The sound of the effects delivered via
the stereo outputs may vary slightly when "indiv" is selected.