1-4: Lfo - Yamaha TG500 Owner's Manual

VOICE EDIT MODE / 1: Quick Edit
[PLAY MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 1: Quick Edit -> [ENTER] -> [PAGE]
-> 1-4 : LFO -> [ENTER]
for quick, easy programming.
Type (LFO modulation type)
Speed
Depth
102

1-4: LFO

1-4: LFO
Here, the main LFO parameters are simplified and concentrated in a single screen
For full LFO parameters see page 136.
VCE QED LFO <Type >
1
:vibrato 33 64
Type
Range: --------, 1: vibrato, 2: tremolo, 3: wahwah
Determines whether the LFO will produce vibrato (pitch modulation),
tremolo (amplitude modulation), or wahwah (filter cutoff modulation) effects.
The current LFO parameter settings (page 136) are selected when this param-
eter is set to "--------".
Range: 0 ... 99
Sets the speed of the LFO.
"0" is the slowest speed setting, producing an LFO speed of approximately
0 Hertz. The fastest setting of 99 produces an LFO speed of approximately 25
Hertz.
Range: 0 ... 127
Sets the maximum amount of amplitude (tremolo), pitch (vibrato), or filter
cutoff (wahwah) modulation that can be applied to the current voice.
A "0" setting produces no modulation while a setting of "127" produces
maximum modulation.
Speed Depth