Aeg Data Copy - Yamaha TG500 Owner's Manual

VOICE EDIT MODE / 3: Full Edit. 3-2: AEG
[PLAY MODE] -> VCE PLAY -> EDIT/COMPARE -> 3: Full Edit -> [ENTER] -> 3-2: AEG -> [ENTER]
any other voice (the "source" voice) to be copied to the current voice. You can copy
an envelope that is close to the type you want, then edit it to produce the required
sound.
the [-1/NO] and [+1/YES] keys to select the voice from the which the AEG data is to
be copied.
appear on the display.
copy operation. Once the copy operation has finished, "Completed!" will appear on
the display briefly, then the display will return to the AEG edit mode.

AEG DATA COPY

118
AEG DATA COPY
This function facilitates voice editing by allowing the amplitude EG data from
Press the [STORE/COPY] key while in the AEG edit mode.
VCE AEG Copy from?
¡58:SC Bell2
Use the [MEMORY] key to select the internal, preset, or card memory; then use
Once the source voice has been selected, press the [ENTER] key. "Sure?" will
VCE AEG Copy Sure?
¡58:SC Bell2
Press the [+1/YES] key to copy the AEG data, or press [-1/NO] to cancel the