TROUBLE SHOOTING
The TG500 is a very versatile instrument with many features and functions that affect operation.
In many cases, what appears to be a fault with the TG500 can actually be traced to an improperly set
parameter or, at the most fundamental level, to something as simple as a bad connection.
Here's how to determine if the problem is internal (e.g. parameter settings) or external (e.g. connec-
tions, amplifier, etc.):
Listen Via Headphones.
Plug a pair of headphones into the TG500 and play. If the headphone sound is OK, then the problem
is most likely in the amplifier or mixer you are using, or the audio connection cables.
Check the Sound In the Voice, Performance, and Multi Modes.
If the problem only occurs in one mode or one voice/performance/multi, then the cause is most likely
a parameter setting related to that mode or voice/performance/multi. If the problem occurs in all modes,
then the cause may be a utility parameter or other parameter that affects all modes.
The following are some common problems and probable causes:
Amplifier, Mixer, Connection Problems
Symptom
Performance Mode Problems
Symptom
Possible Cause
Possible Cause
TROUBLE SHOOTING
Appendix
315