3-2-09: Parameter 1; 3-2-10: Parameter 2 - Yamaha TG500 Owner's Manual

PERFORMANCE EDIT MODE / 3: Full Edit. 3-2: Effect
3-2-09: PARAMETER 1 / 3-2-10: PARAMETER 2
[PLAY MODE] -> PFM PLAY -> [EDIT/COMPARE] -> 3: Full Edit -> [ENTER] -> 3-2:Effect -> [ENTER]
-> [PAGE] -> 3-2-09 : Parameter 1 -> [ENTER]
parameters in these three screens to fine-tune the effect.
parameter screens. The name of the selected parameter is shown in the upper right
corner of the display, while the parameter unit ("s" for seconds, "%" for percent,
"dB" for decibels, etc.) is shown in parentheses in the lower right corner.
84 3-2-09: PARAMETER 1 / 3-2-10: PARAMETER 2
Each of the TG500's 90 effects has 8 parameters that can be edited via the
PFM EF1 Param <L Pitch >
0
-10 0 (---)Ãé
Parameters
PFM EF1 Param <R Fine >
0
è +1 2.7 0.9 (---)Ãé
PFM EF1 Param <Init Dly>
0
è 5 9.0 ( ms)Õ
, .
Use the [ ] and [ ] keys to select the parameters and switch between the three
The parameters are different for each effect (refer to page 271 for details).
-> 3-2-10 : Parameter 2 -> [ENTER]