1-5: Voice Setting - Yamaha TG500 Owner's Manual

[PLAY MODE] -> PFM PLAY -> [EDIT/COMPARE] -> 1: Quick Edit -> [ENTER] -> PAGE
-> 1-5 : Voice Setting -> [ENTER]
Other parameters that can be individually set for each performance layer are
provided in this screen: sustain enable, pitch envelope generator enable, oscillator
fixed note mode and note number.
The layer to be edited is selected as described on page 50. The currently selected
layer is shown in square brackets on the upper display line.
Sus (Sustain)
PEG (Pitch EG enable)
Fix (Oscillator fix)
FNt (Oscillator fix note number)

1-5: VOICE SETTING

PFM QED VCE Set [A]<Sus>
n
o on off ---
Sus PEG
Range: off, on
Turns sustain off or on for the selected layer. Interesting effects can be
produced by setting some layers to respond to the sustain footswitch in the
normal way, while others do not sustain at all.
Range: off, on
Turns pitch envelope generator control of the selected layer off or on.
Range: off, on
Turns the oscillator fixed-pitch mode off or on (see page 109). The "FNt"
parameter described below can be used to set the note produced when the "fix"
mode is turned on.
Range: C-2 ... G8
Sets the frequency (note) at which the selected layer will be played when
the "fix" mode is turned on ("---" is displayed in place of the note when the
"fix" mode is turned off).
The C-2 to G8 range of this parameter covers a full 10-1/2 octaves. "C3"
corresponds to "middle C" on a keyboard.
PERFORMANCE EDIT MODE / 1: QUICK EDIT
Fix FNt
1-2: VOICE SETTING 57