VOICE EDIT MODE / 3: Full Edit. 3-5: LFO
[PLAY MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 3: Full Edit -> [ENTER] -> 3-5: LFO -> [ENTER]
other voice (the "source" voice) to be copied to the current voice. You can copy an
LFO setup that is close to the type you want, then edit it to produce the required
sound.
the [-1/NO] and [+1/YES] keys to select the voice from the which the LFO data is to
be copied.
appear on the display.
copy operation. Once the copy operation has finished, "Completed!" will appear on
the display briefly, then the display will return to the LFO edit mode.
140
LFO DATA COPY
LFO DATA COPY
This function facilitates voice editing by allowing the LFO parameters from any
Press the [STORE/COPY] key while in the LFO edit mode.
VCE LFO Copy from?
0
¡5
:ME Angel
Use the [MEMORY] key to select the internal, preset, or card memory; then use
Once the source voice has been selected, press the [ENTER] key. "Sure?" will
VCE LFO Copy Sure?
¡50:ME Angel
Press the [+1/YES] key to copy the LFO data, or press [-1/NO] to cancel the