Yamaha TG500 Owner's Manual page 50

38
4. The Multi Mode
SELECTING DIFFERENT INSTRUMENTS FOR EDITING
The currently selected multi instrument (1 of 16) is shown in square brack-
ets in the lower left hand corner of each screen. A different instrument can be
selected for editing in this mode by using the [-1/NO] and [+1/YES] keys while
holding the [UTILITY/SELECT] key.
MLT é è
Inst = 1
NO STORE OPERATION REQUIRED
When you're finished editing a multi setup, simply press the [PLAY
MODE] key to return the MULTI PLAY mode. The edited data is automatically
stored in the multi setup you selected prior to editing — there is no need to
specifically "store" the edited data as there is in the VOICE and PERFORM-
ANCE modes.
The [STORE/COPY] key can, however, be used to copy the current multi
setup to a different location. Operation is the same as in the store procedure
described on page 33.
Further Possibilities ...
Be sure to read through the "MULTI EDIT MODE" (page 197) for full
details on all parameters available for multi programming.