3-2-05: Output - Yamaha TG500 Owner's Manual

PERFORMANCE EDIT MODE / 3: Full Edit. 3-2: Effect
[PLAY MODE] -> PFM PLAY -> [EDIT/COMPARE] -> 3: Full Edit -> [ENTER] -> 3-2:Effect -> [ENTER]
-> [PAGE] -> 3-2-05 : Output -> [ENTER]
effect processor) on or off, determining whether any dry signal output can occur at
the OUTPUT.
layer is shown in square brackets on the upper display line.
Dry1
Dry2
80

3-2-05: OUTPUT

3-2-05: OUTPUT
These parameters turn the "dry lines" (i.e. the signal paths which bypasses each
PFM Output [A]
Dry1: o
The layer to be edited is selected as described on page 50. The currently selected
Range: off, on
Turns the "dry line" bypassing the EFFECT 1 signal processor on or off.
When this parameter is turned "off," the "WET:DRY" parameters (page 154)
have no effect.
Range: off, on
Turns the "dry line" bypassing the EFFECT 2 signal processor on or off.
When this parameter is turned "off," the "WET:DRY" parameters (page 154)
have no effect.
n
Dry2: on