4-12: Control Lfo - Yamaha TG500 Owner's Manual

MULIT EDIT MODE / 4: Effect
[PLAY/MODE] -> MLT PLAY -> [EDIT/COMPARE] -> [PAGE] -> 4: Effect -> [ENTER] -> [PAGE]
-> 4-12: Control LFO -> [ENTER]
trol. The TG500 has an independent effect LFO that is set up by the following pa-
rameters.
Wave (LFO waveform)
Speed (LFO speed)
Delay (LFO start delay)
216

4-12: CONTROL LFO

4-12: CONTROL LFO
All of the modulation-type effects — chorus, flanging, etc. — require LFO con-
MLT EF Ctrl LFO <Wave >
i
˚ tr 99 20
Wave
Determines the waveform of the effect LFO.
Sets the speed of the effect LFO.
"0" is the slowest speed setting, producing an LFO speed of approximately
0 Hertz. The fastest setting of 99 produces an LFO speed of approximately 25
Hertz.
Sets the delay time between the beginning of a note and the beginning of
effect LFO operation for the selected element.
The minimum setting "0" results in no delay, while the maximum setting of
"99" produces a delay of approximately 2.66 seconds before the LFO begins
operation (5.3 seconds before it reaches maximum depth).
Delay
Speed