[UTILITY/SELECT] -> 1: System -> [ENTER] -> [PAGE] -> 1-2: Effect Bypass -> [ENTER]
This parameter turns the entire TG500 effect system on or off.
Effect Bypass
Range: off, on
the effect sound will be delivered via the TG500 outputs. When turned "on,"
the internal effect system is completely bypassed and only the direct (dry)
sound of the tone generator will be delivered via the outputs.
with the TG500.
UTILITY MODE / WAVE EDIT MODE / 1: System
1-2: EFFECT BYPASS
UTL SYSTEM
Effect Bypass= off
When effect bypass is turned "off" the TG500 effect system is active and
Use the "on" setting if you plan to use external signal processing equipment
1-2: EFFECT BYPASS
221