Initialize Functions (INITIAL)
Initialize Functions (INITIAL)
The Initialize functions allow you to restore the factory settings of the MU100.
NOTE
Since the Initialize functions replace existing data, you should save any and all
important settings to a MIDI data storage device before using these functions.
(See page 34.)
Operation
1 Press the UTIL button and select "INITIAL," then press the
ENTER button.
2 From the Initialize menu, select the type of data to be initialized:
Factory Settings (FactSet), selected Sound Module mode (XGInit,
GM Init, C/MInit, PFMInit) or Drum (DrumInit) Then, press the
ENTER button to call up the selected data dump.
152
Utility Mode