Weighing Mode; Available Keys - CAS CI-6000A Series Manual

11. Weighing Mode

1) How to move
Turn POWER switch on, and you will go to the Weighing Mode.

2) Available keys

KEY
1. Used to remove small variations in the indicator's zero.
1. Used to weigh an item by using the container.
2. Save tare weight and shows net weight.
1. Used to enter tare weight manually
2. If you press this key, "t 00000" is shown on the display.
3. Enter tare weight with arrow keys and save it by pressing the
1. Toggles between gross weight and net weight
2. You can prohibit using of keyboard by pressing G/N key for 4 sec
1. "*" is used in various way.
2. Used to input the set-point value for batching operation
3. You can select this key's function in SET mode F23.
1. ENTER key is used in various way.
2. You can select this key's function in SET mode F24.
3. Set set-point code for batching operation.(00~49)
DESCRIPTION
ENTER key.
to use keyboard again, press G/N key for 4 sec
(Press * key for 2 seconds)
0. Do not use.
1. PRINT Key.
2. HOLD Key.
0. Do not use
1. TOTAL PRINT key.
2. START key for batching operation
3. STOP key for batching operation
(Press the ENTER key for 2 sec.)
47