Measurement Mode; Timer – Start Delay Time Of Finish Signal; Off Range Of Finish Signal - CAS CI-6000A Series Manual

F20
FUNCTION : Measurement Mode
DISPLAY
F20
F20
Set value
( 0 ~ 4 )
F20
F20
F20
F21
FUNCTION : Timer – Start Delay Time of Finish Signal
DISPLAY
F21
Set value
( 00 ~ 99 )
F21
F21
Note 1. This function is used to decide the delay time of start- signal of output which the batching
operation is completed
F22
FUNCTION : Off Range of Finish Signal
DISPLAY
F22
Set value
( 00 ~ 99 )
F22
F22
Note 1. This function is used to decide the size of output signal which batching- operation is
completed.
Note 2. You have to set F19 to 00 if you want to use the F22 function.
If F19 & F22 are set any values at the same time, F22 is disregarded.
Because the priority of F19 is high
0 Do not use.
1
Customer Programmed
Control mode
2
3
Built-in automatic
Program mode
4
00 No delay time
10 1.0 sec
99 9.9 sec
00 Do not use
01 Finish signal is off when the weight is within one division
Finish signal is off when the weight is within ninety nine
99
division
31
DESCRIPTION
Normal batching
Loss-in-Weight batching
Normal batching
Loss-in-Weight batching
DESCRIPTION
DESCRIPTION