How To Go To Test Mode; Test Menu; Key Test - CAS CI-6000A Series Manual

10. Test Mode

1) How to go to Test Mode

Open the front cover of indicator. set SW1 DIP3 on.
① : Select test menu that you wish to test.
② Please select test menu with arrow keys and press ENTER key.
: Test menu is selected. Proceed key test.
③
④ When test is done, Press ENTER key.
To finish test mode, set DIP3 off.
2) Test Menu (TEST 1 – TEST 8)
TEST 1 : Key test
TEST 2 : VFD display test
TEST 3 : A/D conversion test
TEST 4 : Serial interface test (COM1, COM2)
TEST 5 : Printer test (COM2)
TEST 6 : External input/output test
TEST 7 : Analog Out Test(Option)
TEST 8 : BCD Out Test(Option)
TEST 1
FUNCTION : Key test
KEY
ENTER: Go to menu
Selection mode
Other keys : Perform test
Note 1. External input key test is TEST 6.
< Key list >
KEY NO. CODE
ZERO 1 1
G/N 4 4
DISPLAY
tESt 1 TEST 1 condition
Press any key to test then the display
1 1
shows its number and code.
KEY NO. CODE
TARE 2 2
* 5 5
43
DESCRIPTION
KEY NO. CODE
K.T 3 3
ENTER 6 6