Table of Contents
Advertisement
2.5
KL2552 - LED displays
Fig. 5: KL2552 - LEDs
Left LED prism
LED
Display
Run (green)
on
Enc. A: A (green) on
Enc. B: A (green) on
Input 1 (green)
on
Enc. Rdy. (green) on
Enc. A: B (green) on
Enc. B: B (green) on
Input 2 (green)
on
Right LED prism
LED
Display
Drv. Rdy. (green) on
Enable A (green) off
on
Warning A
on
(yellow)
Error A (red)
on
Power (green)
off
on
Enable B (green) off
on
Warning B
on
(yellow)
Error B (red)
on
KL2532/KS2532, KL2552/KS2552
Data transmission on the K-bus is active
There is a signal at input A for encoder A.
There is a signal at input A for encoder B.
There is a signal at input 1.
Encoder evaluation ready to operate.
There is a signal at input B for encoder A.
There is a signal at input B for encoder B.
There is a signal at input 2.
Motor driver ready to operate.
Channel 1 is either not enabled or not ready to operate.
Channel 1 is enabled and is ready to operate.
Warning of channel 1
There is an error at channel 1
The motor supply voltage is not available.
The motor supply voltage is available.
Channel 2 is either not enabled or not ready to operate.
Channel 2 is enabled and is ready to operate.
Warning of channel 2
There is an error at channel 2
Version: 3.2.0
Product overview
15
Advertisement
Chapters
Table of Contents
