Mounting And Wiring; Instructions For Esd Protection; Installation On Mounting Rails; Fig. 7 Spring Contacts Of The Beckhoff I/O Components - Beckhoff KL2532 Documentation

Two channel power stage terminals for dc motors

Table of Contents

Mounting and wiring

4.1

Destruction of the devices by electrostatic discharge possible!

The devices contain components at risk from electrostatic discharge caused by improper handling.

• Please ensure you are electrostatically discharged and avoid touching the contacts of the device directly.

• Avoid contact with highly insulating materials (synthetic fibers, plastic film etc.).

• Surroundings (working place, packaging and personnel) should by grounded probably, when handling

with the devices.

• Each assembly must be terminated at the right hand end with a KL9010 bus end terminal, to ensure the

protection class and ESD protection.

Fig. 7: Spring contacts of the Beckhoff I/O components

4.2

Risk of electric shock and damage of device!

Bring the bus terminal system into a safe, powered down state before starting installation, disassembly or

wiring of the bus terminals!

NOTE

WARNING

Version: 3.2.0

KL2532/KS2532, KL2552/KS2552

Table of Contents

Table of Contents

Ks2532 Kl2552 Ks2552