Led Displays; Fig. 2 Kl2542 - Led Displays - Beckhoff KS2542 Manual

Product overview
2.3

LED displays

Fig. 2: KL2542 - LED displays
Left LED prism
LED
Run (green)
Enc. A: A (green)
Enc. B: A (green)
Input 1 (green)
-
Enc. A: B (green)
Enc. B: B (green)
Input 2 (green)
Right LED prism
LED
-
Enable A (green)
-
Error A (red)
Motor power (green)
Enable B (green)
Warning (yellow)
Error B (red)
10
Display
on Data transmission on the K-bus is active
on There is a signal at input A for encoder A.
on There is a signal at input A for encoder B.
on There is a signal at input 1.
reserved
on There is a signal at input B for encoder A.
on There is a signal at input B for encoder B.
on There is a signal at input 2.
Display
reserved
off Channel 1 is either not enabled or not ready to operate.
on Channel 1 is enabled and is ready to operate.
reserved
on There is an error at channel 1
off The motor supply voltage is not available (less than 7 V).
on The motor supply voltage is available (greater than 8 V).
off Channel 2 is either not enabled or not ready to operate.
on Channel 2 is enabled and is ready to operate.
on The internal temperature has risen to more than 80 °C, or the power
supply voltage has dropped.
on There is an error at channel 2
Version: 2.1.0 KL2542/KS2542