Access Criteria; Lock And Unlock The Door - Mircom TX3 Series Configuration Manual

This chapter describes how the TX3 Nano controls access.
To prevent unauthorized access, there are various configurable features for
determining the conditions and type of access.
The Configurator lets you define and configure the various modes of operation
for managing access, defining inputs and assigning outputs. In order to
effectively use the Configurator, you must understand these configurable
features.
This chapter explains
•
•
•
•
7.1

Lock and Unlock the Door

The following operation applies only if the output is configured as Lock.
The door unlocks when:
•
•
When the door is unlocked, the Unlock Door for timer starts (see section
2.6.8 on page 22).
The door is also unlocked when the Auto Unlock Door schedule is active
(see section 2.8 on page 27).
The door is relocked when:
•
•
TX3 Nano Configuration Manual
52
Copyright 2018
Lock and Unlock the Door
Timers
Call Restrictions
System Status
A valid DTMF digit is received from the resident's phone while the PSTN
or GSM call is in progress
A valid SIP message is received with a DTMF digit while a VOIP call is in
progress
The Unlock Door for timer ends
The door sense input becomes active
7

Access Criteria