Mircom TX3 Series Configuration Manual page 43

Holidays. For a schedule, select specific holidays or select them all.
• Exclude. If Exclude is selected, then the schedule is not active
during the selected holidays.
• Include. If Include is selected, then the schedule is active during
the selected holidays.
Periods. A period is a period of time that the schedule or holiday is active
for. A schedule or holiday can have more than one period.
Click Add Period and provide the following information:
• Name. Type a name for the period.
• Recurring. A period can recur - that is, you can define times when
the period is in effect, and when it is not in effect.
Select No if the period occurs only once (it is a single continuous
period of time). Select Weekly or Yearly if the period recurs
every week or every year.
• Event from. If you selected No, enter the start and end times and
dates for the period. If you selected Weekly, enter the times of day
when the period recurs. If you selected Yearly, enter the times and
dates when the period recurs.
• Repeat on. If you selected Weekly, select the days of the week
when the period recurs.
• Starts on. If you selected Weekly, enter the day when the
recurrences start. If you selected Yearly, enter the year when the
recurrences start.
• Ends. Enter the week or year when the recurrences end, or select
Never.
Note: Starts on and Ends define the start and end of all the recurrences of
the period.
4. Click Add Schedule or Add Holiday at the top of the window.
Note: If your schedule starts before midnight on one day and ends the next
day, you must define two periods (one for each day). For example,
if you have a schedule that goes from 10:00 PM on Tuesday to 2:00
AM on Wednesday, you need one period for Tuesday and a second
period for Wednesday. The Tuesday period starts at 10:00 PM and
ends at 11:59 PM; the Wednesday period starts at 12:00 AM and
ends at 2:00 AM.
TX3 Nano Configuration Manual
Copyright 2018
Schedules and Holidays
43