Figure 21. Add Residents - Second Window - Mircom TX3 Series Configuration Manual

4. Click Next.

Figure 21. Add Residents - second window

5. Provide the following information in the right pane:
Location. Enter the resident's address.
Add OnSIP Account. If you have configured an OnSIP administrative
account (see section 2.3 on page 15), click Add OnSIP Account to
create an OnSIP account for this resident. OnSIP sends a notification email
to the resident, and the Configurator enters the resident's new OnSIP
account in the SIP Username field.
See section 3.6 on page 39 for information on how the resident sets up an
OnSIP account.
Type. Select Phone Number, SIP Username, or NSL.
Phone Number. If you selected Phone Number, enter the phone
number for the resident.
SIP Username. If you selected SIP Username, enter the SIP
username for the resident.
NSL Relay Code. If you selected NSL, enter the NSL unit relay code
associated with the resident.
Ring Pattern. If you selected NSL, select the resident's phone ring
pattern from the list.
TX3 Nano Configuration Manual
Copyright 2018
Residents
37