Figure 11. Subgroups; Figure 12. Residents - Mircom TX3 Series Configuration Manual

2.
•
•
2.6.6 Calls
Configuring calls lets you specify the call duration, number of rings, call
scheduling, and volume.
TX3 Nano Configuration Manual
20
Copyright 2018
The TX3 Nano shows the subgroups. Because the Group Max is four but
there are seven residents in the A group, the first four residents are in the
subgroup Anticlea - Ares, and the next three residents are in the subgroup
Artemis - Atreus.

Figure 11. Subgroups

Select Anticlea - Ares and press the Call button.
The TX3 Nano shows the residents starting from Anticlea.

Figure 12. Residents

To call Apollo, select Apollo and press the Call button.
To navigate back to the main list of resident groups, press the Home button
to go to the top of the list of residents, then press the Home button again to
go up one level to the list of subgroups (Figure 11) Then press the Home
button a third time to up another level to the list of groups (Figure 10).
Nano Settings