Change The Language Of The Configurator; Enter The Onsip Administrative Account; Configure User Privileges - Mircom TX3 Series Configuration Manual

•
•
•
2.2

Change the Language of the Configurator

•
2.3

Enter the OnSIP Administrative Account

The TX3 Nano can use your OnSIP administrative account to quickly create SIP
addresses for the TX3 Nano and residents. The TX3 Nano is a SIP client and can
communicate with other SIP clients through a SIP server.
After you enter your OnSIP administrative account information, then the
Configurator can quickly create OnSIP accounts for the TX3 Nano and residents.
1.
2.
3.
2.4

Configure User Privileges

The system administrator can assign a user privilege level to a user, add or
remove users, and reset their passwords.
The user levels consist of the following:
Operator. An operator has read access only. An operator can monitor live events
and accept access point requests.
User. A user has all of the rights of the operator plus the ability to read and write
residents.
Advanced User. An advanced user has all of the rights of user plus the ability to
read and write schedules and holidays.
Manager. A manager has all of the rights of an advanced user plus user
management privileges.
TX3 Nano Configuration Manual
Copyright 2018
Schedules - page 41
Nano Settings - this chapter
Events - page 46
Click the en in the upper right corner, and select the language that you want
to view the site in.
Click the Preferences button in the upper right corner of the window.
In the OnSIP Admin Account section, enter the username and password
for your OnSIP administrative account.
Click Save Changes.
Nano Settings
15