Figure 18. Discovered - Mircom TX3 Series Configuration Manual

3.
Remove a TX3 Nano from the list of discovered TX3 Nanos
•
Note:
Rediscover the IP address of a TX3 Nano
•
Configure another TX3 Nano
•
Note:
TX3 Nano Configuration Manual
32
Copyright 2018
Other TX3 Nanos on the network appear.

Figure 18. Discovered

Type a name for each TX3 Nano, and click the plus sign to add it.
Click the trash icon beside the TX3 Nano that you want to remove.
The TX3 Nano disappears from the list.
A TX3 Nano removed from this list continues to function, but is no
longer synchronized. You can configure it by logging into it as
described in section 2.1 on page 13.
If the IP address of a TX3 Nano changes, then a broken link icon
appears beside it.
Click the broken link icon to update the TX3 Nano with the right IP
address.
Select a different TX3 Nano in the list of discovered TX3 Nanos and
configure its settings, inputs and outputs, access point, and correlations.
This feature lets you configure more than one TX3 Nano from the
same Configurator. You do not need to log into each TX3 Nano
separately in order to configure it.
Nano Settings