Figure 13. Sip Account Details - Mircom TX3 Series Configuration Manual

2.6.8 Keypad
This feature lets you specify how the resident unlocks the door for the visitor.
Configure how the resident unlocks the door
1.
Note:
2.
2.6.9 SIP Account Details
In the SIP Account Details section, enter the SIP account details for this TX3
Nano. The TX3 Nano is a SIP client and can communicate with other SIP clients
through a SIP server.
You need:
•
•
TX3 Nano Configuration Manual
22
Copyright 2018
In the Keypad section, provide information for each the following:
Open Door by Pressing. Specify which key on the resident's phone
unlocks the door. By default this is 9.
Do not select 4 (this is used to refuse entry or disconnect).
Unlock Door for. Specify the time in seconds to keep the door unlocked.
NSL Call Wait Key. For NSL lines only, specify the key to press on the
resident's phone to connect to the lobby phone while on an outside call. By
default this is 2. Do not select 4; this is used to refuse entry or disconnect.
Click Save Changes at the top of the window.

Figure 13. SIP Account Details

The IP address or domain name of the SIP server.
The SIP username, SIP password, and Auth username of the TX3 Nano.
Nano Settings