Mircom TX3 Series Configuration Manual page 18

Name a TX3 Nano
1.
2.
Change the language on a TX3 Nano
1.
2.
2.6.3 Restart
Restart the TX3 Nano
1.
2.6.4 Volume
Change the speaker or microphone volume
1.
2.
2.6.5 Grouping
You can group residents alphabetically by first name in the Nano display. This
feature lets visitors navigate quickly through a long list of residents.
Group residents
1.
TX3 Nano Configuration Manual
18
Copyright 2018
Type a name for the TX3 Nano in the Name field.
Click Save Changes at the top of the window.
Select a language in the Language menu.
Click Save Changes at the top of the window.
Click the Restart Nano button.
In the Nano Settings section, provide information for each of the
following:
Speaker Volume. Specify the TX3 Nano speaker call volume.
Microphone Volume. Specify the TX3 Nano microphone call sensitivity.
Click Save Changes at the top of the window.
In the Nano Settings section, provide information for each of the
following:
Group Threshold. Specify the number of residents that the TX3 Nano
should have before it creates resident groups. For example, if there are 10
residents, then the TX3 Nano will create resident groups only if the
Group Threshold is 10 or lower.
Nano Settings