Administrator's Responsibilities - Mircom TX3 Series Configuration Manual

The TX3 Nano has been tested with the following SIP clients:
•
•
•
•
1.4.4 Configure a TX3 Nano for VOIP
To configure a TX3 Nano for VOIP, you must:
•
•
1.5

Administrator's Responsibilities

The software lets you configure and monitor activities of all TX3 Nano units
connected to the TX3 network. The administrator is responsible for the
configuration of the TX3 system, TX3 Nano, Configurator and all of the related
components.
The administrator accesses the administrator mode from the Configurator and
has full rights to every function within the software. The administrator performs
many of the administrative tasks required for installing and managing the
software, including assigning permissions for each level of user. TX3 Nano
personalization depends on preferences defined by the building management.
Additional responsibilities may be provided by the building manager.
The administrator is responsible for:
•
•
•
•
TX3 Nano Configuration Manual
Copyright 2018
TX3 InSuite
Mircom's MiEntry app for iOS and Android
microSIP for Windows (http://www.microsip.org/)
Kamailio (http://www.kamailio.org/)
Configure theTX3 Nano with its SIP account details (section 2.6.9 on page
22).
Configure the residents with their SIP account details (section 3.3 on page
36).
Warning! In order to keep the TX3 system secure,
follow these precautions:
Change the default password on the TX3 Nano.
Perform a virus scan on all picture files before importing
them into the TX3 Nano.
Secure the TCP/IP network to prevent unauthorized access
to the TX3 Nano.
adding new tenants
system configuration
monitoring the operational health of the system
assigning user privileges
Introduction
11