Safety Summary - Keysight Technologies U4301 User Manual

Safety Summary

The following general safety precautions must be observed during all phases of operation of this
instrument. Failure to comply with these precautions or with specific warnings or operating
instructions in the product manuals violates safety standards of design, manufacture, and intended
use of the instrument. Keysight Technologies assumes no liability for the customer's failure to comply
with these requirements. Product manuals are provided with your instrument on CD-ROM and/or in
printed form. Printed manuals are an option for many products. Manuals may also be available on
the Web. Go to
the page.
General
Do not use this product in any manner not specified by the manufacturer. The protective features of
this product may be impaired if it is used in a manner not specified in the operation instructions.
Before Applying
Verify that all safety precautions are taken. Make all connections to the unit before applying power.
Note the instrument's external markings described in "Safety Symbols".
Power
Ground the
If your product is provided with a grounding type power plug, the instrument chassis and cover must
be connected to an electrical ground to minimize shock hazard. The ground pin must be firmly
Instrument
connected to an electrical ground (safety ground) terminal at the power outlet. Any interruption of
the protective (grounding) conductor or disconnection of the protective earth terminal will cause a
potential shock hazard that could result in personal injury.
Fuses
See the user's guide or operator's manual for information about line-fuse replacement. Some
instruments contain an internal fuse, which is not user accessible.
Do Not Operate in
Do not operate the instrument in the presence of flammable gases or fumes.
an Explosive
Atmosphere
Do Not Remove the
Only qualified, service-trained personnel who are aware of the hazards involved should remove
Instrument Cover instrument covers. Always disconnect the power cable and any external circuits before removing the
instrument cover.
Cleaning
Clean the outside of the instrument with a soft, lint-free, slightly dampened cloth. Do not use
detergent or chemical solvents.
Do Not Modify the
Do not install substitute parts or perform any unauthorized modification to the product. Return the
Instrument product to a Keysight Sales and Service Office for service and repair to ensure that safety features
are maintained.
In Case of Damage
Instruments that appear damaged or defective should be made inoperative and secured against
unintended operation until they can be repaired by qualified service personnel.
CAUTION
WARNING
Keysight U4301 PCIe Gen3 Analyzer User's Guide
www.keysight.com
A CAUTION notice denotes a hazard. It calls attention to an operating procedure, practice,
or the like that, if not correctly performed or adhered to, could result in damage to the
product or loss of important data. Do not proceed beyond a CAUTION notice until the
indicated conditions are fully understood and met.
A WARNING notice denotes a hazard. It calls attention to an operating procedure,
practice, or the like that, if not correctly performed or adhered to, could result in
personal injury or death. Do not proceed beyond a WARNING notice until the indicated
conditions are fully understood and met.
and type in your product number in the Search field at the top of
3